Used Mazak machines are on many buyers' lists, especially the Integrex multitasking line, but there is no official price data for them. Earlier versions of this guide cited missing marketplace pages, dealer inventory notes, a video claim about bearing reuse and a family-level spindle price range. We removed all of that because no official source states it. What Mazak does publish is how its spindle program and warranty work, and that is useful when you judge a used machine.
Mazak's spindle program, in its own words
Mazak describes its spindle unit rebuild and repair program as leveraging 30 years of spindle rebuild expertise. It lists more than 700 spindle variations in its fully stocked inventory and 97% same day shipping for parts and new or refurbished spindles. It states a turnaround of 3-5 days after it receives your spindle, and says every repaired and rebuilt spindle receives 12 hours of test-stand runoff and vibration benchmarking.
These are Mazak's claims about Mazak's own program. They do not tell you what a repair will cost or what condition a given used machine is in. They do tell you that a factory route exists, which matters if you plan to keep a machine for years.
What repair means at Mazak
Mazak's brochure explains the repair step: install necessary replacement parts along with new bearings, O-rings, springs and seals. It also says components are only replaced when absolutely necessary to help minimize your costs. Its stated position on who should do the work is plain:
A spindle's original manufacturer should perform repairs or rebuilds, and the benefits of Mazak's spindle services include:
That is a manufacturer's view, so weigh it as one. It does suggest asking whether any spindle work on a used machine was done by Mazak or by a third party.
Warranty terms and what they mean for a used buyer
Mazak's warranty runs for two (2) years from the date of Original Start-Up of the product, with repair or replacement except for consumable wear parts. The same document says the spindle component is warranted for two (2) years or 4,000 hours, whichever is earlier, except as otherwise quoted for specialty or high-speed spindles. Rebuilt spindles carry a 1-year or 4,000-hour warranty with Mazak-certified installation.
These terms are tied to the original start-up, and the pages we read do not say whether any coverage passes to a second owner. Ask Mazak or its distributor directly, and get the answer in writing.
What to ask a seller
- Which exact model, spindle option and control does the machine have?
- Has any spindle been repaired, rebuilt or replaced, and by Mazak or someone else?
- Is there documentation of the work, including test records?
- Does any warranty remain, and will Mazak confirm it for you as the new owner?
- What does Mazak or its distributor quote for the specific repair you are worried about?
We have no official source for used Mazak prices or repair costs, so we give none. Treat any confident Mazak price curve you see elsewhere as unverified until you know where it came from.
Sources
Every quotation above was fetched from the document linked here and matched word for word on 2026-10-27.
- Spindle & Unit Rebuild Program (Mazak Corporation), checked 2026-10-27
- Spindle & Unit Rebuild Program (Mazak Corporation), checked 2026-10-27
- Spindle & Unit Rebuild Program (Mazak Corporation), checked 2026-10-27
- Spindle & Unit Rebuild Program (Mazak Corporation), checked 2026-10-27
- Spindle & Unit Rebuild Program (Mazak Corporation), checked 2026-10-27
- Spindle & Unit Rebuild Program (Mazak Corporation), checked 2026-10-27
- Mazak Spindle Repair and Rebuild Services (Mazak Corporation), checked 2026-10-27
- Mazak Spindle Repair and Rebuild Services (Mazak Corporation), checked 2026-10-27
- Mazak Spindle Repair and Rebuild Services (Mazak Corporation), checked 2026-10-27
- Service Receipt (Mazak Corporation), checked 2026-10-27
- Service Receipt (Mazak Corporation), checked 2026-10-27