FANUC ROBODRILL and Brother SPEEDIO machines are both compact vertical machining centers built for fast tool changes and small parts. Earlier versions of this guide leaned on marketplace price tables and a search that returned no usable failure evidence. We removed those figures because no official source states them. This version sticks to what FANUC and Brother publish.
FANUC ROBODRILL: the D21MiB5 Plus
FANUC America describes the D21MiB5 Plus as a standard-stroke ROBODRILL with a table size of 650 x 400 mm and 21 tools. Its published travel (X/Y/Z) is 500/400/330 mm. FANUC lists a maximum cutting feed of 30000 mm/min and a tool change time of 0.9 s. The table load is 300 kg and the machine mass is 2000 kg.
Those figures describe the current Plus model. A used ROBODRILL may be an earlier alpha generation, so do not assume the numbers carry over. Ask for the model designation and control from the data plate and confirm the specification with FANUC.
Brother SPEEDIO: the Xd1 series
Brother's Xd1 page covers the S300Xd1, S500Xd1 and S700Xd1. It lists table sizes of 600 X 400 for the S300Xd1 and S500Xd1 and 800 X 400 for the S700Xd1. It gives two ten-thousand-rpm spindle specifications:
10,000 min -1 high-torque spec. (optional) Max. torque : 92Nm Max. output : 26.2kW 10,000 min -1 standard spec. Max. torque : 40Nm Max. output : 18.9kW
That difference matters when you buy used. A high-torque machine tolerates heavy drilling and tapping better than a standard-spec machine, so verify which spindle is fitted. Brother also says tools up to 3 kg can be changed in the shortest time, and tools up to 4 kg can also be changed with minimal increase in time. On the 14/21-tool magazine it lists Chip - Chip at 1.3 s.
What the makers do not tell you
Neither FANUC nor Brother publishes failure rates, typical repair costs or used values on these pages. We have no official source for any of them, and we will not guess. If someone quotes you a reliability story or a price for either brand, ask where it came from.
Inspection checklist
- Confirm the exact model, spindle option and control on the machine.
- Check the tool changer by running several full tool changes with heavy and light tools.
- Run the spindle through its range and watch for noise or heat.
- Ask for the maintenance history and any repair paperwork.
- Get written quotes from the maker or its distributor for any repair you plan to price in.
Sources
Every quotation above was fetched from the document linked here and matched word for word on 2026-10-27.
- FANUC ROBODRILL | Vertical Machining Centers (FANUC America), checked 2026-10-27
- α D21MiB5 Plus (FANUC America), checked 2026-10-27
- α D21MiB5 Plus (FANUC America), checked 2026-10-27
- α D21MiB5 Plus (FANUC America), checked 2026-10-27
- SPEEDIO S300Xd1 / S500Xd1 / S700Xd1 (Brother Industries), checked 2026-10-27
- SPEEDIO S300Xd1 / S500Xd1 / S700Xd1 (Brother Industries), checked 2026-10-27
- SPEEDIO S300Xd1 / S500Xd1 / S700Xd1 (Brother Industries), checked 2026-10-27
- SPEEDIO S300Xd1 / S500Xd1 / S700Xd1 (Brother Industries), checked 2026-10-27